Archive for the ‘hardwood floor refinishing prices’ Category
Apples to apples floor finish
Wednesday, April 7th, 2010
I do a number of estimates for my floor business and I am always perplexed by the lack of information other floor companies are providing for the homeowner. Let me bring about a few real world points for people in order to dispel the myths surrounding the “bidding” process.
1) Two coats versus three coats versus coverage rate
Honestly this is a six versus one half dozen comparison. Your average floor finish has a recommended coverage rate for application. Some finishes have an optimal application range of 300 square feet per gallon where others are at 500. This has a big impact on the “mil thickness” (durability) of the finish. Three thin coats will actually be less durable than a quality two finish coat job. Cheap contractors stretch finish thin when applying it. Three coats sounds like a better thing, but is only a repeat visit and more work for the contractor if the coverage is less than adequate.
2) Resins and solids content
This is a real hidden point of discussion for some floor companies, particularly low priced companies and large outfits. Waterborne finishes have a protective resin suspended in water that is the “thing” that provides durability. The chemical composition of this resin has a tremendous impact on durability. Cheap floor finishes have weak resins and are “watery” with coverage rates near 600-700 square feet per gallon. They are lower in solids (the resins that provides durability).
3) Two component versus one component waterbased finish
One component floor finishes have minimal scuff and scratch resistance. They rely simply on oxygen to link the finish resins. Two component finishes rely upon a chemical crosslinker to “matricize” the finish resins and form a really tough scuff resistant floor. In talking with several finish chemists during NWFA schools, I have found that two component finishes fare almost twice as well in taber abrasion tests that test durability. For a perspective single component finishes can be about $25-50 per gallon, where a quality two component waterborne ranges from $80-110 per gallon.
CHEAP ONE COMPONENT FLOOR FINISH
DURABLE TWO COMPONENT FLOOR FINISH
My Point!!!!
Ask your contractor about these points. Why? Because if they don’t have an answer they are NOT a professional. They are a “guy with a sander” who can multiply a square foot price and use a tape measure. Please make a fair comparison when evaluating floor refinishing estimates. Otherwise you will be taken for a ride by a snake oil salesman and have a worn out floor in two years.
Tags: floor finish durability, Hardwood floor durability, hardwood refinishing, low-VOC hardwood floor finish, waterborne finish, wood floor sanding
Posted in Hardwood floor refinish, floor refinishing portland oregon, hardwood floor finish, hardwood floor refinishing prices, waterbased finish, wear layer thickness | No Comments »
The price isn’t right
Sunday, November 8th, 2009
One of the things I have been startled about lately is how the hardwood floor refinishing market in Portland has been subject to really large variances in price. At our company we try to deliver a service with considerable value that includes very personable customer service in addition to a quality product. We make a very disciplined effort to hide no element of what is included, which are the questions that consumers should ask in order to make an apples to apples comparison:
1) How many finish coats will be applied? This determines longevity to a great degree
2)What type of finish will be used? Home Depot polyurethane versus GlitsaMax 2 component waterborne urethane isn’t really a contest, the latter will start to outperform after 2-3 years easily. Just look at my floors, which are the test subject of 2year old and 4year old boys dragging toys and dropping everything. They look brand new one and a half years later.
3)How is the floor being filled? Is the floor being trowel filled across the whole area to alleviate gaps or simply spot filled in the large areas? This has a considerable impact on labor in the process.
4)How clean is the contractor? I think most people who want a refinish might care about a clean house. Does the contractor vacuum the house and vents after sanding and before coating the floor? Do they use dust collection? These are questions to ask when you want to know how MUCH service you are paying for.
5) Is the contractor licensed and CURRENTLY bonded? Do they pay their taxes? These may seem like simple questions but I assure you they are essential because if the contractor does not have a current bond, then any damage they are liable for upon entering your home comes from your pocket in most cases if there is no bond. Paying taxes is essential for supporting our parks, schools, etc… so it goes without saying that it is important for a community.
6) Do they contribute to any organizations or have ANY credentials beyond a license?
Our memberships and certifications alone cost us close to $2000 per year alone not counting any time for involvement with committees or helping educate other members. This may seem like a minor element, but I say that it is the fundamental building block for a quality contractor for two reasons. The esteem of being known for quality work goes with being in an organization and secondly the access to the latest information ensures better quality in your business.
I hope that these questions stay current amongst the consumers of Portland so that during the trying times we can all maintain or hopefully elevate the state of this industry rather than take the path of least resistance by lowering quality and price simultaneously.
Tags: dustless refinishing, Hardwood floor durability, hardwood refinishing, Swedish finish, wood floor sanding
Posted in Dustless Hardwood Refinishing, Hardwood floor durability, hardwood floor choices, hardwood floor finish, hardwood floor refinishing prices, portland hardwood professional | 1 Comment »